28
Damper and IFP Service
Apply grease to the o-ring, bushing, and into the cavity of the wiper
seal.
Insert the Counter Measure spring into the sealhead.
Place a 19 mm socket over the spring. Press down on the socket until
the spring snaps into the sealhead.
Remove the bottom out bumper from the shaft. Clean and inspect the
shaft for damage and replace if necessary.
Reinstall the bottom out bumper on the shaft assembly.
Remove the main piston nut. Clean the nut and the threads of the shaft
assembly to remove all traces of Loctite.
NOTICE
Make sure all traces of Loctite have been removed from the shaft
assembly before proceeding. Failure to remove Loctite can restrict
movement in the main piston assembly and reduce functionality in the
shock.
23
Title Case
24
19 mm
25
26