27
Damper and IFP Service
Use a 2 mm hex wrench to remove the bleed screw from the sealhead.
Use a 1.5 mm guide pin to push the nylon compression ball out of the
back of the seal head through the bleed port.
Discard the compression ball.
NOTICE
To ensure proper function, do not reuse the compression ball.
Pierce and remove the rod wiper seal.
Install a new wiper seal. Install the wiper seal with the stepped face
away from the seal head.
NOTICE
Do not scratch the seal head with the pick.
Remove and discard the o-ring from the sealhead, then install a new
o-ring.
19
2 mm
20
1.5 mm Guide Pin
21
Pick
22