36
Charger Damper Bleed
Use your fingers to install the bottom bolt into the rebound damper
shaft, then pull down on the bottom bolt.
Cover the top cap with a rag and cycle the rebound damper shaft a few
times to pre-bleed air from the damper.
Pull the rebound damper shaft down until it stops.
⚠
CAUTION - EYE HAZARD
Cycle the rebound damper shaft very slowly. Failure to do so can result
in oil ejecting from the top cap. Wear safety glasses.
Fill the RockShox Charger bleed syringe half full with 3wt suspension
oil and thread the syringe and Charger hose fitting into the
compression top cap assembly.
NOTICE
Only use the syringe included with the RockShox Charger Bleed kit.
Do not use a syringe that has been in contact with DOT brake fluid.
DOT brake fluid will permanently damage the seals and cause the
damper to malfunction.
3
4
5
Maxima PLUSH 3wt or RockShox 3wt
RockShox Charger Bleed Syringe
