40
Charger Damper Installation
2 0 0 H o u r S e r v i c e
C h a r g e r D a m p e r I n s t a l l a t i o n
Remove the bolt from the rebound damper shaft.
Spray isopropyl alcohol on the damper assembly and clean it with
a rag.
Insert and thread the damper into the upper tube.
Use a torque wrench with a 30 mm socket to tighten the compression
top cap to 28 N•m (250 in-lb).
RCT3:
Turn the compression cam assembly
counter-clockwise
until it
stops. This is the open position.
RC:
Turn the low speed compression adjuster
clockwise
until it stops.
This is the closed position.
1
2
30 mm
28 N•m (250 in-lb)
3
4
15 mm
