31
Charger Rebound Damper Re-tune (optional)
Install the shims on a small wrench or pick in the order of your desired
tune. Slide the shim stack onto the piston face. Use your fingers to
squeeze the stack and center the shims.
NOTICE
Ensure the hoop shim is centered on the shim stack.
Thread the main piston nut onto the rebound damper piston. Use a
torque wrench with a 10 mm socket to tighten the nut to
3.7 N•m (33 in-lb).
NOTICE
Ensure the check shim is centered, and not pinched under the piston.
Remove the assembly from the vise.
5
Centered shim stack
Off center hoop shim
6
10 mm
3.7 N•m (33 in-lb)
Centered check shim
Pinched check shim