30
Piston Assembly Installation
Apply a thin film of DOT grease to the threads of the sleeve.
Place the sleeve on the coupler.
The sleeve threads must be oriented away from the base of the
coupler.
Use the SRAM Lever Internals Assembly Tool tool to engage and
thread the sleeve and coupler onto the piston assembly.
Engage the slots on the sleeve with the contact adjust knob and
continue to thread the SRAM Lever Internals Assembly Tool tool in a
clockwise rotation until it stops.
Use needle nose pliers to install the SwingLink bushings.
If the SwingLink bushings fall out easily, apply a small amount of DOT
grease to the bushings to help hold them in place.
4
DOT Grease
Avid High-Performance DOT 5.1 Fluid
22 mm
5
6
Lever Internals Assembly Tool
20 mm or 15 mm Thru Axle
Lever Internals Assembly Tool
QR
7
Needle nose pliers
Avid High-Performance DOT 5.1 Fluid
22 mm
