Model SR585
i
Bariatric Stand-On Scale
Operating and Service Manual
Part No. MAN585
i
-KG_MICROBAN_201006
Page 19 of 22
S
Instruments, Inc.
,
600 Young Street, Tonawanda, NY 14150
Tel: 716-693-5977 Fax: 716-693-5854 URL:
www.srscales.com
email:
Copyright 2020
S
Instruments, Inc.
TROUBLESHOOTING
SYMPTOM
REASON/CORRECTIVE ACTION
The characters only appear on half of the
display.
Ensure AC power supply is firmly plugged in
Press the
“WEIGH”
button or remove one battery.
Wait five seconds, then re-install the battery and try
the “
WEIGH
” button again.
The display lights appear to work, but do
not respond to button activation.
Check to ensure the membrane switch label is correctly
plugged into display board.
Check to ensure the calibration switch is not in the
Calibration Mode (Figure 9).
The display shows no reading at all.
Ensure AC power supply is firmly plugged in
Check to ensure batteries are installed correctly
(see
directions
for
BATTERY REPLACEMENT
).
Check display cable to make sure it is connected
securely.
For additional information or assistance, telephone our Service Hotline: 1-800-654-6360
