ALL IMAGES ARE FOR ILLUSTRATION PURPOSES ONLY. ACTUAL PRODUCTS MAY VARY.
MEGA
PROCESS FOOD PROCESSOR INSTRUCTION MANUAL
JUICING
ASSEMBLY OF THE CITRUS JUICER
A
Assemble the mixing bowl
as described in
assembly
of
the
mixing
bowl
-
steps
1 - 2,
page
5
I
Attach the citrus juicer cone
to the citrus juicer
basket
J
Mount the assembled citrus juicer
onto the drive
shaft
K
Ensure that the tab on the side of the citrus juicer
is above the mixing bowl
handle Align the
rectangle on the rim of the citrus juicer
with the
open lock symbol on the upper rim of the mixing
bowl
Firmly holding the tab turn the citrus juicer
clockwise until it locks into place The rectangle on
its rim should be aligned with the closed lock symbol
on the upper rim of the mixing bowl
L
Turn the rotary switch
to setting
1
Carefully place half
of the citrus fruit on top of the citrus juicer cone
, hold
firmly and slowly press it down to extract the juice
USEFUL TIPS
Ensure that chopping blade
, kneading blade
or emulsifying disk
are set up inside the
mixing bowl
before adding ingredients
To activate a short, powerful pulse movement,
turn the rotary switch
to the
P
setting and hold
for the desired time
To avoid cutting the ingredients too fine use the
pulse
function repeatedly a few times
When processing chocolate or cheese avoid
processing for a prolonged time The appliance
may heat up and the ingredients will start to melt
When using the french fry blade
insert the
potatoes into the feeder tube lengthwise to get
longer sticks If the potato is too large, cut it to
the width of the feeder tube
Never force the pusher
down the feeder
tube or overfill it Feed the food gradually
When slicing or shredding soft foods (cucumbers,
pears, cheese, and similar) use speed setting
1
to avoid turning the food into a pulp like texture
Process large quantities of food in batches up
to maximum 1200ml
If food gets stuck in the feeder tube switch the
appliance off as described in
dissasembly
of
the
mixing
bowl
and remove the mixing bowl
cover
Remove the food from the feeder tube
and cut it to smaller pieces before processing
I
J
L
K
DISASSEMBLY OF THE MIXING BOWL
When food processing is finished, turn the rotary switch
to
0
, ensure the appliance has come to a complete stop
and then unplug the mains cable from the power socket
Hold the handle of the mixing bowl
with your right hand
and the feeder tube on the mixing bowl cover
with your
left hand, and turn it anti-clockwise to release the safety
interlock
then remove the mixing bowl cover
Remove the attachments as described below:
blade
disc
-
carefully lift the blade disc
from the
mixing bowl
by holding the middle part of the drive
shaft
To remove the blade
turn
the blade disc
upside down Firmly hold down the
side opposite to the blade,
and push the rounded
side of the blade down, until it pops out
chopping
blade
-
kneading
blade
-
emulsyfing
disc
-
carefully lift the blade retainer
from the mixing
bowl
Carefully remove the chopping blade
,
kneading blade
or emulsifying disc
from the
blade retainer
citrus
juicer
-
turn the citrus juicer basket
anti-
clockwise to release the safety interlock
, then lift
and remove it from the mixing bowl
Push the handle of the mixing bowl
anti-clockwise to
unlock it
Lift the mixing bowl
carefully and empty the ingredients
Remove the drive shaft
EXERCISE EXTREME CARE WHEN HANDLING BLADES AS THEY ARE
EXTREMELY SHARP.
UNLOCKED
LOCKED
7
