MGIM 9373-9374 21-07-2020 | SQ PROFESSIONAL LTD © 2020 ALL RIGHTS RESERVED.
MEGA
PROCESS FOOD PROCESSOR INSTRUCTION MANUAL
SPEED SETTINGS
1
-
low
speed
- for whipping, emulsifying, kneading,
folding, light blending of liquid ingredients,
grating, slicing, shredding, juicing
2
-
high
speed
- chopping, whisking, grinding, heavy
blending with solid ingredients and thicker liquids
P
-
pulse
(
short
bursts
of
very
high
speed
) - for pre-
grinding or coarse grinding, rough blending of solid
ingredients and thick liquids, chopping, and short,
powerful pulse movements when needed The
rotary switch
does not permanently engage in
the
pulse
setting You have to hold the rotary switch
or turn it repeatedly to the
pulse
setting)
CLEANING
AFTER USING THIS APPLIANCE ALWAYS TURN THE SWITCH TO THE 0
SETTING AND UNPLUG THE APPLIANCE FROM THE MAINS SOCKET.
MOTOR UNIT
NEVER IMMERSE THE MOTOR UNIT IN WATER.
Wipe the motor unit
clean with a damp cloth and
dry immediately with a soft cloth to avoid scratches and
water marks on the surface
LIGHT CLEANING
MIXING BOWL - BLENDING JUG
- fill the empty mixing bowl
or blending jug
half way with tepid soapy water
Place the mixing bowl
or blending jug
on the
motor unit
Insert the blade retainer
with one of
the attachments (
,
or
) into the mixing bowl
and attach the mixing bowl cover
Place blending jug
lid
with measuring cup
on the blending jug
Turn the rotary switch
to
pulse
setting several times,
each time holding for a few seconds
Empty the mixing bowl
or blending jug
and rinse
until clean Dry with a soft, lint free cloth
GRINDING MILL
- wipe the grinding mill base
with
a damp cloth or sponge, using tepid soapy water, if
necessary
HANDLE VERY CAREFULLY. BLADES ARE EXTREMELY SHARP.
Carefully remove any stuck food remnants from
the blades with a small dish-washing brush Dry
immediately with a soft, lint free cloth
Wash the grinding mill cover
with warm soapy
water and dry thoroughly You may keep the grinding
mill
assembled when not in use to prevent any
harm from sharp blades
THOROUGH CLEANING
EXERCISE EXTREME CARE WHEN HANDLING BLADES AS THEY ARE
VERY SHARP. KEEP THE CHOPPING BLADE COVERS
ATTACHED
WHEN CHOPPING BLADE
IS NOT IN USE.
Ensure that the mixing bowl
, blending jug
and
grinding mill cover
are completely empty
Disassemble the blade disc
and the citrus juicer
Use a small dish-washing brush to remove the stuck
food from the fine, coarse and wavy slicing blades
/ fine and coarse shredding blades
/ french
fry
and slurry blades
, around the blades inside
the blending jug
, on the grinding mill base
and
from the slits on the citrus juicer basket
Wash the mixing bowl
and mixing bowl cover
,
blending jug
, blending jug lid
and measuring cup
, grinding mill cover
and all the attachments with
tepid soapy water
Dry immediately with a soft, lint free cloth and store in
a cool, dry place
All parts
except the motor unit
can be washed by
hand or in a dishwasher
Do not use harsh scourers and aggressive or abrasive
detergents
ENSURE THAT ALL PARTS ARE COMPLETELY DRY BEFORE
ASSEMBLING AND OPERATING THE APPLIANCE.
TROUBLESHOOTING
Appliance does
not work
Check if the accessories are
correctly assembled and
attached
Check the mains cable is
correctly plugged into the
power socket
Check if the safety interlocks
are engaged
Appliance
suddenly stops
during operation.
Check if the safety interlocks are
engaged
Re-assemble the mixing bowl
and the mixing bowl cover
The appliance is
running but the
attachments are
not working.
Ensure that the driving shaft
and the attachments are correctly
installed
Check if there are any stuck
ingredients that are blocking the
blades
10
