ALL IMAGES ARE FOR ILLUSTRATION PURPOSES ONLY. ACTUAL PRODUCTS MAY VARY.
MEGA
PROCESS FOOD PROCESSOR INSTRUCTION MANUAL
R
S
T
U
USEFUL TIPS
Always stabilise the grinding mill
by placing
your hand on top of the grinding mill cover
when operating this appliance
For best results grind in intervals of 30
seconds with a 1 minute pause in between
Repeat the grinding process until you are
happy with the grind consistency
Use
pulse
setting in short intervals for coarse
grinds or to crush the ingredients
Only grind spice seeds that do not contain
moisture or oil such as peppercorn, coriander
seeds, mustard seeds and similar
Grinding extremely hard, oily, moist or sticky
ingredients may damage this appliance
Hard grains such as corn, wheat, rye and
similar may cause damage to the grinding
mill cover
Nuts contain a lot of oil which will release
during the grinding process and may clog
the grinding mill base
never
add
oils
or
liquids
while
grinding
.
Experimenting with the length of grinding will
enable you to get your preferred grind
To yield the best flavour and aroma always grind
fresh ingredients Freshly ground coffee and
spices have more flavour and are best when
ground just before use
To prolong the freshness store the coffee beans
and the ground coffee in an airtight container in
a cool, dry place
GRINDING
ASSEMBLY OF THE GRINDING MILL
ENSURE THAT THE APPLIANCE IS UNPLUGGED FROM THE POWER
SOCKET THEN REMOVE THE DRIVE SHAFT
FROM THE MOTOR
UNIT
, IF PRESENT. ALWAYS ENSURE THAT THE SEALING GASKET
ON THE GRINDING MILL BASE
IS PROPERLY FITTED. BLADES ARE
EXTREMELY SHARP. HANDLE CAREFULLY.
R
Turn the grinding mill cover
upside-down and fill it
with the dry ingredients Do not fill above the
max
mark
S
Turn the grinding mill base
upside-down and insert
it into the grinding mill cover
, aligning triangle
under the
max
line with the open lock symbol under
the grinding mill base
T
Holding the grinding mill cover
firmly, turn the grinding
mill base
anti-clockwise until it locks into place
Ensure the grinding mill cover
is fitted securely
U
Mount the assembled grinding mill
on the motor
unit
aligning the triangle under the
max
mark on
the grinding mill cover
with the open lock symbol
on top of the motor unit
Turn the grinding mill
clockwise until it locks in place
and the triangle under the
max
mark is aligned with
the closed lock symbol on the motor unit
Turn the
rotary switch
to desired speed
DISASSEMBLY OF THE GRINDING MILL
When grinding process is finished, turn the rotary
switch
to
0
, ensure the appliance has come to a
complete stop and then unplug the mains cable from
the power socket
Remove the grinding mill
from the motor unit
by
turning it anti-clockwise
Turn the grinding mill
upside-down and hold firmly
with one hand With the other hand, turn the grinding mill
base
clockwise, carefully remove it and scoop the
ingredients out of the grinding mill cover
UNLOCKED
UNLOCKED
LOCKED
LOCKED
9
