background image

7

USEFUL TIPS

 •

Raw meat and fish will preserve more moisture if 

thoroughly chilled before grinding. When grinding larger 

quantities, it is important to note that fats can build up 

inside the grinding head 

, decreasing your grinder’s 

efficiency. If this occurs, dismantle the appliance, wash 

all attachments in hot soapy water and reassemble.

 •

Handle meat lightly to prevent compacting. 

 •

Refrigerate ground meat immediately and cook within 24 

hours. If freezing, use within a maximum of 2 months.

 •

Always clean the meat grinder and the attachments 

thoroughly between consecutive uses and before storing.

CLEANING

Always unplug the appliance from the electric socket 

before cleaning. Never immerse the motor housing 

in water or any other liquid. Exercise extreme care 

when handling the cutting blade as it is very sharp.

 •

Dismantle the appliance in reverse steps shown in the 

assembly diagrams 

E

 to 

A

.

 •

If the cutting plate 

a

 is stuck, insert a flat screwdriver 

between its protrusions and the slot on rim of the 

grinding head 

, and carefully detach.

 •

Press the release button 

e

 to release the grinding head  

 and remove it from the motor housing 

.

 •

Wipe the motor housing 

 clean with a damp cloth and 

then dry immediately with a soft cloth to avoid scratches 

and water marks on the surface. 

 •

Rinse used attachments with clean warm water to 

remove larger debris. Use a brush and warm soapy water 

(maximum 50°C) to clean thoroughly then rinse well 

with clean, warm water again. Leave to air dry. Ensure all 

the parts are completely dry before reassembling.

 •

Wipe all cutting plates 

a

 and the cutting blade 

 with 

a cloth moistened with vegetable oil after each use, and  

before use if the appliance was not used for long periods.

 •

Meat grinder attachments are not dishwasher safe.

 •

Do not use harsh detergents, bleach or bleach solutions.

ENVIRONMENTAL

To reduce environmental and health problems 

due to hazardous substances in electrical and 

electronic goods, appliances marked with 

the symbol below must not be disposed of 

with unsorted municipal waste. Please repair, 

reuse or recycle appropriately.

SPECIFICATIONS

Rated Voltage: 

220-240V~ 

Frequency:  

50/60Hz 

Rated Power: 

500W

ELECTRICAL

The product must not be used without the fuse 

cover fitted.

Should the power cable or the power plug become 

damaged, arrange for these to be replaced by Customer 

Service or a qualified person before continuing to use the 

appliance. The appliance is fitted with a 13A fuse (BS1362) in 

a 13A plug (BS1363). 

SERVICE

The product is not user-serviceable. If it is not working, read 

the instructions, check the plug fuse and main fuse/circuit 

breaker. If it is still not working, consult your retailer.
If that does not solve the problem ring Customer Service – 

they may be able to offer technical advice. Please have the 

Model Number to hand, as they will not be able to help you 

without it.
If you are advised to return the product to us, pack it 

carefully, include a note with your name, address, day 

phone number, and description of the problem. If under 

a guarantee, say where and when it was purchased and 

include a valid VAT receipt. Send it to SQ Professional Ltd.

GUARANTEE

The guarantee for this product is covered by SQ Professional 

Limited. Any faults with this product arising through a 

manufacturer defect will be covered for 1 year from the date 

of purchase, subject to a valid vat receipt being presented. 

This does not include faults or damage caused by misuse of 

general wear and tear. SQ Professional Ltd will not be held 

liable for general wear and tear, or eventual damages to 

persons, animals or objects caused by incorrect installation 

or deriving from improper, erroneous or unreasonable use.
Please contact customer services on 01992 716 070 or send 

an e-mail to [email protected], Monday to Friday 

from 09:30 - 17:30. This does not affect your statutory rights.

All images are for illustration purposes only. Actual products may vary.

Summary of Contents for BLITZ 5673









Reviews: