background image

4

IMPORTANT SAFEGUARDS

Do not use the appliance in a bathroom, near water, 

or outdoors. Do not operate the appliance with wet 

hands or bare feet. 
Do not immerse any of the parts (appliance, mains 

cable, plug) in water or other liquids during use to 

protect from fire, electric shock and personal injury. 
Do not use the appliance if it is damaged or 

malfunctioning. 
Do not leave the appliance unattended whilst in use. 

Use and store it out of reach of children. 
Before attaching or removing any parts, make sure 

the mains cable is unplugged from the electric 

socket and operation Button is on ‘0’.

 •

This appliance is intended for household use only.

 •

Ensure that the appliance is always placed on a firm and 

flat surface, away from any edges of the worktop. Do not 

place the appliance onto a metal tray or metal surface 

whilst in use. Do not place the appliance on, or near, a 

hot gas or electric burner or in a heated oven.

 •

Keep the appliance and mains cable away from the 

edges of worktops and out of reach of children. Route 

the mains cable so it does not overhang, and cannot be 

tripped over or caught.

 •

Do not let the mains cable run across an open space, 

such as between a low power socket and a table, or 

across any hot area, such as a cooker. Heat may damage 

the mains cable. 

 •

The connections on both sides of the mains cable 

(the appliance and the power socket) should never 

be strained. If the mains cable is damaged it must be 

replaced by a qualified person or service to avoid any 

hazards.  

 •

Switch off the appliance and unplug from the socket 

before changing attachments, or approaching parts that 

move while in use. Only remove the attachments when 

the appliance has come to a complete stop. Unplug the 

appliance when not in use.

 •

Ensure that the appliance has come to a complete stop 

before cleaning and storing away. Keep the attachments, 

motor housing 

, cable, and plug away from sources of 

heat. Store in a dry place.

 •

Do not use the meat grinder for any purpose aside from 

its intended use.

 •

The cutting blade 

 has very sharp edges. Take extreme 

care when handling or cleaning it.

 •

The use of attachments not recommended by the 

manufacturer may carry a risk of injury to persons. 

 •

When carrying the unit be sure to hold the motor 

housing 

 with both hands. Do not carry the appliance 

by holding only the hopper plate 

w

 or grinder head 

.

 •

Do not place your fingers into the feeder tube of the 

grinding head 

 while the meat grinder is in operation.

 •

Ensure that there is ample space around the appliance 

and that the air passage at the bottom of the motor 

housing 

 is kept free of any blockages.

 •

Never attempt to grind bones, nuts or other hard foods. 

Do not grind ginger or other foods with hard fibres. 

 •

Do not operate the meat grinder without meat inside the 

grinding head 

 as this can result in a severe damage to 

the appliance.

 •

Always use the supplied food pusher 

 to push food 

down the feeder tube on the grinding head 

. Never 

use your fingers, a fork, a spoon, a knife or other 

utensils.

 •

Before using the kibbe attachment 

f

 remove the cutting 

blade 

 and cutting plate 

a

 .

 •

The use of excessive pressure to push the meat into the 

feeder tube on the grinding head 

 may cause jamming.

 •

Reverse function is prohibited while the appliance is 

operating. Wait at least one minute until grinder has 

come to a complete stop to change function.

 •

Do not use any meat debris left in the grinding head  

 for consumption after you have finished using the 

appliance. Clean the grinding head 

 and throw any 

meat debris away. 

 •

Do not operate the appliance continuously with heavy 

loads for more than 10 minutes. Allow the motor to rest 

for 15 minutes between each use.

 •

Read all operating instructions before using the 

appliance.

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE

BEFORE FIRST USE

Wipe the motor housing 

4

 with a damp cloth and dry with 

a soft cloth. All parts that come in touch with food are to be 

thoroughly cleaned before being used for the first time (see 

section on Cleaning).

When operating the meat grinder for the first time, there 

may be a slight smell of burning. This presents no danger to 

the user and does not indicate a defect in your meat grinder. 

The odour will soon disappear.

Summary of Contents for BLITZ 5673









Reviews: