17
95-03010
1. Remove retaining ring and spacer from out-
put shaft. (Figure 19)
NOTE: Spacer is not required on Model 49.
2. Slide output gear off output shaft and re-
move key.
3. Remove the six socket-head cap screws
securing the front case to the pump.
NOTE: On Model 239 there are eight socket-
head cap screws.
4. Using a soft mallet, tap on case to separate
case from pump.
5. Remove silicone sealant and key.
FRONT CASE DISASSEMBLY
(Figure 20)
1. Press output shaft out of case.
2. Press bearing off of output shaft.
3. Use inner race puller to remove two front
idler bearings.
MAINTENANCE
Figure 19
Figure 20
SILICONE
SEALANT
RETAINING RING
SPACER
OUTPUT GEAR
FRONT
IDLER
BEARINGS
OUTPUT
BEARING
FRONT CASE TO PUMP DISASSEMBLY
SOCKET HEAD
CAPSCREWS (6)
CASE
KEY
OUTPUT SHAFT
OUTPUT
SHAFT
Triplex Sales
1-847-839-8442
www.triplexsales.com
