Waukesha Cherry-Burrell
Parts Lists
April 2008
95-03083
Page 37
Set & Forget Control Top
Item #
Part No.
1
Base - w/ effector Clipp. Solenoid Control Module
119579
2
Mounting Cup - Control Module
119557
3
O-ring
N70134
4
O-ring
N70157
5
SCHS - 1/4-28 x .50", 18-8 SS
119625
6
Set Screw - 1/4-20 x .75", 18-8 SS, Cone Point
119624
7
Sensor Mount - Control Module
120218
8
Screw - #4-40 x .625" Plastite Phillips Pan Head
121658
9
Push in Plug w/ Tab, 3/8"
121659
10
Booster - Solenoid Valve, Clippard
112467
11
Solenoid Valve - Clippard 24VDC
112468
12
Sensor - Efector PNP
119747
13
Washer - #6 Nylon x .062"
120067
14
SHCS - 6-32 x .25", 18-8 SS
119626
15
Breather Plug
112470
16
Pipe Plug - 1/8-27 NPT
78-73
17
Nylon Washer #10
⌧
17-111
18
SHCS - 10-32 x .25", 18-8 SS
⌧
30-519
19
Pin Connector (optional) See Wiring Schematics
Varies
20
Cable Strain Relief (optional and not shown)
17-88
21
Terminal Block Assembly
⌧
119645
22
SHCS - 6-32 x .375", 18-8 SS
⌧
119627
23
Effector AS-I Slave Card (optional)
112469
24
Device Net Card - Interlink 4 in/4 out (optional)
123648
25
Cover Assembly - Standard Control Module
119561
26
Warning Label
5902473
27
Vent Plug - Control Module
119599
28
O-ring
N70107
29
O-ring
N70044
Solenoid Valve - Numatics 120VAC
122237
Solenoid Valve - Numatics 24VAC
122238
Solenoid Valve - Numatics 24VDC
122239
119677
119679
119681
PL5027-CH80
⌧
Not shown - used to plug hole when solenoid not used.
⌧
Not shown - used in place of AS-I or Device Net Card.
⌧
Used for both Terminal Block Assembly and Control Cards.
Used only with Clippard Solenoid
Part Description
33
Parts list shown is for valve with Set & Forget Control Module. Necessary parts
will vary depending on whether there is a terminal strip, AS-I, Device Net, one
solenoid, two solenoids, etc. Please contact factory for additional information.
Set & Forget Sensor Stem & Target; 4"/5" actuators
Set & Forget Sensor Stem & Target; 4"/6" long stroke
Set & Forget Sensor Stem & Target; 6" single seat & Mix
Proof actuators