SPX Waukesha Cherry-Burrell W Series, Manual, Page: 12 / 48

Waukesha Cherry-Burrell Installation and Operation
April 2008 95-03083 Page 11
Wiring and Pin Instructions: Set & Forget Switch
Note: The Set & Forget Switch is available with 24VDC Power only
PAGE, FIGURE CONNECTION VOLTAGE
Page 11, Fig. 12 Strain Relief DC
Page 12, Fig. 13 6 Pin Eurofast DC
Page 12, Fig. 14 8 Pin Eurofast DC
Page 13, Fig. 15 10 Pin Eurofast DC
Page 13, Fig. 16 12 Pin Eurofast DC
Page 14, Fig. 17 AS-I Wiring DC
Page 14, Fig. 18 DeviceNet Wiring, Single Seat DC
Page 15, Fig. 19 DeviceNet Wiring, Mix Proof DC
Figure 12: Strain Relief
Solenoid 1
Solenoid 2
Solenoid 3
Terminal block control module
use with 0, 1, 2, or 3 solenoids
Sensor and Solenoid Wires
this side of Terminal Block
Cable wires this side
of terminal block
Vent Plug
Top Port Location
when plugging use
1/8-27 NPT Pipe Plug (P/N 78-73)
Optional PMO Yoke Prox Switch
Route wire through Port 4 and Top
Pole # 12 ID
On this side
Pole # 1 ID
On this side
Cable Strain Relief
P/N 17-88
Sensor Side
Ground (Not shown for clarity)
Brown (Sensor)
Gray (Sensor)
Black (Sensor)
White (Sensor)
Blue (Sensor)
Black (Solenoid 1, 2, 3)
Black (Solenoid 1)
Black (Solenoid 2)
Black (Solenoid 3)
Brown (PMO Yoke Prox)
Blue (PMO Yoke Prox)
Ground Wire
Cable Wire Side
VA100-582