P350 flexitrax Operation Manual 11
Figure 3.10: Installing the large adjustable elevator
Figure 3.11: Adjusting the large adjustable elevator
3.1.5 Auxiliary Lighthead
The lighthead accessory, see Figure 3.12, offers additional
LEDs to provide the camera with more light when
needed. With more light you can deploy the crawler in
larger pipes or in pipes made from absorbent material that
would otherwise reduce visibility when inspected with the
standard camera LEDs.
The lighthead is fitted between the camera and the
crawler or between the camera and the elevator. The
lighthead provides up to an additional 850 lm.
Figure 3.12: Auxiliary lighthead
P350-ELV-LAM large adjustable elevator (P356 only)
(Figure 3.8 right). The large adjustable elevator will
deploy the P356 in pipes from up to 600mm (24").
Figure 3.8: P350 camera elevators
Adjustable elevator
To adjust the P350-ELV-A elevator:
Loosen the Allen-head and the vent screws
(Figure 3.9)
Set the camera mount to the desired height.
Tighten the Allen-head and the vent screws to
secure the elevator.
Figure 3.9: Adjustable elevator
•
1.
2.
3.
Allen-head screw
Large adjustable elevator
To fit the large adjustable elevator to the P356 crawler
align the four mounting holes and secure it using the four
screws provided. This is demonstrated in Figure 3.10.
To adjust the P350-ELV-LAM elevator twist the square-
recessed socket with the supplied chuck key to vary the
height as required. This is demonstrated in Figure 3.11.
Vent screw
Summary of Contents for PEARPOINT P350
Page 2: ...P350 flexitrax system...
Page 5: ...P350 flexitrax Operation Manual iii...
