14
15
Setting the Clock
Set the clock before you start operating the air conditioner. The clock will be displayed on
the remote control panel regardless if air conditioner is in use or not.
1. After batteries are inserted in the remote, the clock panel will display “12:00”.
2. Press and hold the CLOCK button for 3 seconds, the time will ash.
3. Press
(forward) or
(backward) buttons to set time.
4. Each press of the button will move the time forward or backward by one minute. Press and
hold to move the time forward/backward in 10-minute intervals.
5. Once the right time is achieved, press the CLOCK button or release
/
button and wait
for 5 seconds. The clock stops ashing, time has been set.
Note: The clock time must be set before Timer feature can be set. If you adjust the clock time
after setting On/Off Timer, the remote will send the adjusted timer information to the unit.
CAUTION: Static electricity or other factors (in case of extremely high voltage) can cause
remote controller clock to initialize. If your remote controller is initialized (ashing 12:00),
readjust the clock before operation.
COOL / FAN operation
Ensure the unit is plugged in and power is available.
1. Press the MODE button to select COOL or FAN mode.
2. Press the
/
button to set desired temperature (COOL mode only).
3. Press the FAN button to select fan speed: Auto, Low, Med or High.
4. If the unit is off, press ON/OFF button to start operation. Press ON/OFF button again to
stop operation.
DRY (Dehumidifying) operation
Ensure the unit is plugged in and power is available.
1. Press the MODE button to select DRY mode.
2. Press the
/
button to set desired temperature.
3. If the unit is off, press ON/OFF button to start operation. Press ON/OFF button again to
stop operation.
NOTE: In Dry mode, fan speed is automatically controlled and cannot be adjusted.
TIMER operation
1. Press the TIMER button and the remote ashes “0.0” next to either Timer-On or Timer-Off
indicator.
2. Set desired time by pressing
to move forward or
to move backward.
- Press or hold the
/
button to move time by 0.5 hour increments, up to 10 hours, then
by 1 hour increments up to 24 hours.
- The selected time will register in 3 seconds after setting.
3. After setting the timer for Timer-On or Timer-Off, check the Timer indicator on the display
panel is illuminated.
To Cancel: press the CANCEL button will remove all timer settings.
To change setting, repeat steps 1 to 3.
OPERATING INSTRUCTIONS - REMOTE
NOTE:
- When timer operation is set, the remote controller automatically transmits the timer signal
to the unit at the specied time. Therefore, keep the remote controller in a location from
which it can transmit the signal to the unit properly.
- Timer setting is limited to 24 hours.
Examples of Timer Setting
OPERATING INSTRUCTIONS - REMOTE
TIMER-ON: this feature is useful when you want the unit to automatically
turn on at a certain time (like before you return home from work).
Example, start AC in 8 hours:
1. Press the TIMER button until the Timer-On indicator is displayed and
setting time is ashing.
2. Press
/
button until “8.0” is displayed.
3. Release
/
button and wait for 3 seconds. The set time stops ashing,
timer is set.
TIMER-OFF: this feature is useful when you want the unit to automatically
turn off at a certain time (like after you go to bed).
Example, stop the AC after 6 hours:
1. Press the TIMER button until the Timer-Off indicator is displayed and
setting time is ashing.
2. Press
/
button until “6.0” is displayed.
3. Release
/
button and wait for 3 seconds. The set time stops ashing,
timer is set.
COMBINED TIMER (Timer-Off -> Timer On)
This feature is useful when you want the unit to stop after you go to bed and
to start again in the morning when you wake up.
Example, stop the AC after 2 hours and start again 10 hours after setting:
1. Press the TIMER button until the Timer-Off indicator is displayed and
setting time is ashing.
2. Press
/
button until “2.0” is displayed.
3. Press the TIMER button again to display Timer-On indicator.
4. Press
/
button until “10.0” is displayed.
5. Release buttons and wait for 3 seconds. The set time stops ashing,
timer is set.
COMBINED TIMER (Timer-On -> Timer Off)
This feature is useful when you want the unit to start before you wake up and
stop after your leave the house.
Example, start the AC 5 hours after setting and stop 8 hours after setting:
1. Press the TIMER button until the Timer-On indicator is displayed and
setting time is ashing.
2. Press
/
button until “5.0” is displayed.
3. Press the TIMER button again to display Timer-Off indicator.
4. Press
/
button until “8.0” is displayed.
5. Release buttons and wait for 3 seconds. The set time stops ashing,
timer is set.
Fig.24
Fig.25
Fig.26
Fig.27
