47
[Description]
Selecting Chinese character mode
[Note]
·When select Chinese character mode, printer will judge whether the character is
Chinese internal code, if it is, dealing with the first byte in advance. Then the second
one.
·After powering up, the printer will select Chinese character mode by itself.
[Reference]
FS., FS C
FS - n
[Name]
selecting/canceling Chinese underline mode
[Format]
ASCII
FS
-
n
Hex
1C
2D
n
Decimal
28
45
n
[Range]
0 ≤ n ≤ 2, 48 ≤ n ≤ 50
[Description]
selecting or canceling Chinese underline according to value of n
n
function
0, 48
canceling Chinese underline
1, 49
selecting Chinese underline (1dot width)
2, 50
selecting Chinese underline (2dots width)
[Note]
·Printer can add underline to all the characters, including left and right space. But
can not add underline to the space caused by HT command(horizontal tab),either
the 90 degree clockwise characters.
·It does not carry out the underline printing after canceling underline mode, but the
previous set does not change. The default underline width is 1dot.
·The underline width does not change even if changing the character dimension.
· Can use FS ! to select or cancel the underline, the setting of the last received
command is effective
[Default value]
n = 0
[Reference]
FS !
FS.
[Name]
canceling Chinese mode
[Format]
ASCII
FS
.
Hex
1C
2E
Decimal
28
46
[Description]
canceling Chinese mode
[Note]
·When the Chinese mode is canceled, all the characters are the same as ASCII
style, and deal with one byte once.
·Selecting Chinese mode when power on.
[Reference]
FS &, FS C
