27
setting of the last received command is effective.
[Default value]
n = 0
[Reference]
ESC !
ESC G n
[Name]
Selecting/canceling double print mode
[Format]
ASCII
ESC
G n
Hex
1B
47 n
Decimal
27
71 n
[Range]
0 ≤ n ≤ 255
[Description] Selecting/canceling double print mode
·When the lowest bit of n is 0,cancel double print mode
·When the lowest bit of n is 1,select double print mode
[Note]
·Only the lowest bit of n is effective.
·The effect of this command is the same as bold font printing.
[Default value]
n = 0
[Reference]
ESC E
ESC J n
[Name]
Printing and feeding paper
[Format]
ASCII
ESC
J
n
Hex
1B
4A
n
Decimal
27
74
n
[Range]
0 ≤n ≤ 255
[Description]
Printing data in print buffer and feeding paper for [n*units of vertical or lateral
shifting] inches
[Note]
·The current print position will be set to the beginning of the line after printing.
·The ESC 2 and ESC 3 commands set does affect the feeding distance.
·Units of vertical or lateral shifting are set by GSP
·Using vertical shifting units under standard mode
·According to the direction of printing area and the beginning position to select
vertical or lateral shifting units under page mode.The selection modes are as
below:
1
Using vertical shifting when the beginning position is the top left or lower
right corner of the printing area which is set by ESC T;
②
Using lateral shifting when the beginning position is the lower left or top right
corner of the printing area which is set by ESC T;
·The maximum distance of feeding paper is 1016mm(40inches). If it is beyond this
distance, taking the maximum distance.
[Reference]
GS P
