29
[Reference]
ESC V n
[Name]
Selecting/canceling character 90 clockwise.
[Format]
ASCII
ESC
V
n
Hex
1B
56
n
Decimal
27
86
n
[Range]
0 ≤ n ≤ 1, 48 ≤ n ≤ 49
[Description]
Selecting/canceling character 90 clockwise
Value of n:
n
Function
0, 48 canceling character 90clockwise
1, 49 selecting character 90clockwise
[Note]
·This command is just effective under standard mode.
·The underline will be not 90 clockwise when select the underline mode.
·The double height and double width under 90 clockwise are in opposite direction
with the m under the normal mode.
[Default value]
n = 0
[Reference]
ESC !, ESC -
ESC \ nL nH
[Name]
Setting relative printing position
[Format]
ASCII
ESC
\
nL
nH
Hex
1B
5C nL
nH
Decimal
27
92
nL
nH
[Range]
0 ≤ nl ≤ 255
0 ≤ nH ≤ 255
[Description]
Sets the lateral relative position based on the current position by using the
Horizontal or vertical motion unit
·This command sets the distance from the current position to n[(nL+nH×
256)horizontal motion unit]
[Note]
·Any setting that exceeds the printable area is ignored.
·When printing position moves to the right: nL+nH×256=N.
·When printing position moves to the left,using rad-ix complement:
nL+nH×256=65536–N.
· The print starting position moves from the current position to[N×horizontal motion
unit]
·Vertical and horizontal motion units are set by GSP command.
·Horizontal motion units are used under standard mode.
·Under page mode,selecting to use horizontal or vertical motion units according to
