CUSTOMER SERVICE 1-888-707-1880
EMAIL:
Dyaco Canada Inc. 2017
14
Pause/Stop
• Press
Stop
button once or first page button on the screen, the belt will slow down gradually till
fully stopped and keep values of time, distance and calorie on the screen. The screen will reset
after 5 minutes of counting down then return to the previous status.
• Press
Start
button to continue the workout during pause.
• Press “STOP” button twice, the console will ask you if you want to end the workout. If “STOP”
button is pressed the third time, the console will display your workout summary.
Incline
• The incline is changeable any time during the workout.
• Press
Incline Up/Down
button or
I/- button
on the screen to change the incline to the
desired level.
Heart Rate Feature
The Pulse (Heart Rate) on the screen shows the current value of the heart beats per minute. You
must use both left and right stainless steel sensors to pick up your pulse. Pulse values are displayed
anytime the computer is receiving a Grip Pulse signal. You may use the Grip Pulse feature while in
Heart Rate Control. This unit is also compatible with wireless chest strap.
To Turn Treadmill Off
The screen will automatically turn off (go to sleep) after 30 minutes of inactivity. This function is
called sleep mode. In sleep mode, the treadmill will power down most everything except for a
minimum of circuitry for detecting key presses and the safety key so it will start up again if these
are activated. There is only a tiny amount of current used in sleep mode (about the same as your
TV when it is turned off) and it is perfectly fine to leave the main power switch on in sleep mode.
Of course you may also remove the safety key or turn off the main power switch to power down the
treadmill.
Audio:
To listen to any audio source with this unit, you must plug a headset into the port on the console.