Installing the Tanks
–
Part 1
Questions? Call (800)-589-5592
14
52) Connect a water connector
to the PVC nipple coming out
from the shut off valve.
51) Position the well water tank
next to incoming pre-plumb
with its connections facing back
53) Connected the corrugated
pipe to the incoming side on
the back of the well water
filter. Ensure it is fully
tightened.
Installing the Drain Line (Well Water
Filter)
55) Remove the blue lock tab
securing the drain valve in place.
56) Pull the drain valve straight
out.
57) Slide a hose clamp over an
end of one of the provided drain
lines.
This step will require the materials listed below
54) Locate the drain valve on the
left side of the well water filter
head. It is a compression
connection.
50’ Drain Line
Hose
Clamp
Zip Ties
Ultra Whole House Well Water Filter System Combo
