Prepping the Pre-Filter
This step will require the materials listed below
Pre-Filter Housing
Sediment Filter
O-Ring w/Lube
33) Unscrew the lid from the
pre-filter Housing.
37) Insert the Sediment Filter
into the pre-filter Housing.
34) The O-ring will now be laid
into the groove around the top
of the pre-filter Housing tank.
35) Squeeze lubricant onto the
O-ring then spread it using your
finger.
36) Flip the O-Ring over and
lubricate the opposite side as
well.
38) Replace the lid and fully
tighten it
Note: If the tanks have a stainless-
steel sleeve that is covered in
protective plastic. Please remove the
plastic prior to install. The sleeves
can be maintained and polished
using automobile wax.
Questions? Call (800)-589-5592
11
Ultra Whole House Well Water Filter System Combo
