Installing the Tanks
–
Part 2
71) Connect the fourth water
connector to the outgoing side
of the carbon filter tank.
67) Connect a corrugated water
connector to the incoming side
of the pre-filter.
68) Connect the other end of
the connector to the outgoing
side from the well water filter.
69) Connect a water connector to
the outgoing side of the pre-filter.
70) Connect the other end to
the inlet on the softening tank.
Note: The inlet and outlet on
this tank are opposite the well
water filter.
This step will require the materials listed below
Questions? Call (800)-589-5592
16
72) Position the softening tank
next to the carbon filter tank.
Carbon Filter
(Tank 2)
Tank
2
Plumbers Tape
Wrench
1-inch (24-inch Long) Corrugated
Water Connectors (x4)
Note: Ensure there are no kinks
or pinches on the drain line to
avoid issues with drainage.
Ultra Whole House Well Water Filter System Combo
