68) Prior to turning the water
back onto the system use the
spanner wrench to fully tighten
the pre-filter housing to avoid
any leaks.
64) Add a length of PVC to align
with the elbow you just
installed.
65) Add a length of PVC to the
elbow to align with the PVC
leading out from the FS+ tank.
66) Complete the connection by
adding an elbow to the PVC
lengths.
67) The system connections
should look similar to this upon
completion.
63) Add an elbow pointing
towards the outlet connection on
the FS+ tank.
61) Connect the outlet of the CF+
tank to the inlet of the FS+ tank
with a length of PVC.
62) Start to build the connection
to the FS+ tank from the other
side of the bypass. Insert a piece
of PVC into the shut off valve.
Questions? Call (800)-589-5592
13
CSF+ Whole House Filter/Salt Free Softener
