IMPORTANT!
The carbon media inside the filter system MUST soak in water for a minimum of
48 hours prior to installation
Carbon Soak Instructions (48 Hours Prior)
Carbon Filter
Tank (CF+)
Conditioner
Tank
Hose Bib
Assembly (x2)
Lawn Hoses (x2) and
access to a faucet
This step will require the materials listed below
2) Due to weight, stage the
tanks near the installation area.
The two connectors will allow
you to route 1 hose to the tank
and 1 hose away from the tank.
3) Connect the hose from the
faucet into the Inlet on the tank.
Connect the open hose to the
outlet and lead away from your
work area.
4) Run the faucet until you see
water exiting the other hose.
5) Disconnect the Hose Bib
adapters from the Carbon Filter
Tank (CF+) and repeat with the
Softener Tank (FS+)
6) Set the tanks aside and
allow them to sit for 48
hours.
1) Thread a Hose Bib into the
inlet and outlet of the Carbon
Filter Tank (CF+)
Questions? Call (800)-589-5592
4
CSF+ Whole House Filter/Salt Free Softener
