42
OPERATION
User Preference & Component Version
User preference settings allow you to change default settings and review
some historical data of this product. To access user preference settings,
press the CHANGE DISPLAY key for 2 seconds during Banner page.
●
Unit setting: the default unit is English. On the message window, “UNIT
– MPH” or “UNIT – KPH” will appear. Press ▲/▼ keys to toggle between
English and metric units of measure. While your preference appears, press
the ENTER key to confirm your choice and proceed to the next setting.
●
Program Time setting: this setting is to limit how much time a program
can be used. The message window shows “TIME LIMIT - YES” or “TIME
LIMIT - NO”. Press ▲/▼ keys to toggle between Yes or No setting. Press
ENTER on YES to set the timer or NO to de-activate and bypass this setting.
If ENTER key is pressed during YES message, then the message will show
“TIME - xx : 00”. Press ▲/▼ keys or numeric keys to adjust the timer from
5 - 60 minutes (the default time is 30 minutes). Press ENTER to confirm the
setting and proceed to the next setting.
●
Energy Smart setting: the timer range is 5 - 600 minutes with default tim-
er of 30 minutes. When a timer is set, the console will shut power off when
the timer is reached during idle mode. To set timer, the message display will
show “ZZZ TIMER - xx MIN”, press ▲/▼ keys to change the setting. If the
timer is setting less than 5 minutes, the message will show “ZZZ TIMER -
OFF” to de-activate this timer and the console will not get into energy smart
mode at all.
●
Language setting: the default language is English. On the message win-
dow, “XX” will flash twice to represent the country code; then “XX MILE
H>H” or “XX KM H>H” to represent the unit of measurement. Press ▲/▼
keys to change the setting. While your preference appears, press the EN-
TER key to confirm your choice and proceed to the next setting.
After Language setting, it is now to review the history of this console.
Total distance will appear: DIST - xxxx MILE or DIST - xxxx KM”. Press ENTER to
review total time.
Total time will appear: “TIME - xxxx HOUR”. Press ENTER to review Control board
version of this product.
Control board version will appear: CTL T6_5 - xx”. Press ENTER to review drive
board version.
Drive board version will appear: DRV xxxxx - xx”. This is the last information for
review. Press ENTER to exit the user preference setting and return to Banner page.
ting, STOP button can be pressed to end the setting and return to Banner page.