23
STEP 2
Install the Display (Continued)
After securing cable connections, follow instructions (a) through (d) below to
secure the display (A1) into place.
(a) Rotate the display (A1) upward, aligning holes in its support piece to
hooks in the handlebar assembly, fitting the display into place on the
handlebar assembly (A2).
(b) Make sure that the display cover clicks into the handlebar assembly as
shown. Press ownward on the display (A1) to secure it at the correct
angle.
(c) Finally, use screws (45) to secure the display as shown.
(b)
(a)
(C)
