9. MAINTENANCE
MAINTENANCE
Error Messages
The following messages can appear on this product for diagnostic purposes.
ERR1 –
Optic sensor error. The main program IC has not received the optic sensor
signal. Re-start the unit to see if normal operation will resume.
ERR3 –
ERR7 –
Incline motor calibration error. Have a technician calibrate or replace the incline
motor set.
SERVICE REQUIRED/TREADMILL SHUTTING DOWN /STOPPING –
Excessive heat
error. Turn off the treadmill. Then restart the treadmill as a test. Or, let the treadmill rest
for one hour before restarting it. If the message persists, inspect the cable connection
of the thermal sensor on the motor.
FOR ACCURATE HR, HOLD SENSORS FIRMLY WHILE WALKING –
This message
appears when someone touches contact heart rate pads and speed exceeds 4 mph or
6.4 kph. It is a reminder that the contact heart rate system functions best at low speeds
when the user maintains a secure grip on the heart rate contact pads.
Treadmill speed doesn’t match the setting. Contact your local dealer for
assistance.
-43-
