-10-
4. ASSEMBLING THE PRODUCT
Please follow instructions below to assemble this treadmill. Note: For brevity,
throughout this manual, the word “screws” is used where screws, washers, and other
hardware may be involved. Also, the words “left” and “right” are used in reference to
the product and its parts. Note that, as such, these designations correspond to the left
and right sides of a person in position to exercise on the product. Also note that some
parts are marked “L” for left or “R” for right.
This product is designed for assembly by one person. But in some cases, depending
on personal strength and experience, two people may be needed for product
assembly. Get help if you need it, and plan for a safe assembly and product operation
by considering the following:
˙
The site. Do not install this product in an area of high humidity. Exposure to
extensive water vapor, chorine, bromine, ammonia, and other chemicals can
damage the product and present a hazard to exercisers.
˙
The surface. A solid, level surface is required for proper operation of this product.
˙
The space. Allow enough space around the product for safe mounting and
dismounting.
˙
Electrical issues. Make sure that the actual power supply matches product
specifications. Be aware that some components maintain an electric charge even
after the power supply has been disconnected. Turn off the product, wait five
minutes, and unplug the product before removing covers. Before moving the
product, tuck the power cord out of the way to avoid running over it.
Not abiding by instructions in this manual can present a hazard to people and the
product.
