background image

29

OPERATION  

Start a Workout Program

To obtain more accurate calorie counts and target heart rates, operate the product 

via a workout program as follows:
1. Press a workout program key to select a workout or press a goal key (TIME,         

    DISTANCE, CALORIES) to select a goal program. Press ENTER to confirm the  

    program selection.
2. If you select a program key, then “SELECT GOAL” will appear on the 
    exercise feedback window. There are three types of workout goals: TIME, 
    DISTANCE, and CALORIE. Press the key of your preferred workout goal.     
    Its indicator LED will light up.
If you select a goal program, its LED indicator will light up. Follow the instruction 

below to set up the goal and start the program. Once the program is started, resis-

tance and stride setting can be modified at any time.

 

The TIME setting range is from 5:00 to 300:00, with a default value  

   

   of 30:00. If the program time limit is activated in user preference setting,  

    the max time can be entered will change accordingly.. Use ▲/▼ keys        

  or  numeric  keys  (0-9)  to  make  your  selection.  Press  the  ENTER  key  to                                 

    confirm your

 setting and proceed to input your age. Or press QUICK  

      

    START key to start this program right away with default age and weight.

 

The DISTANCE setting range is from 0.1 to 99.9 miles or kilometers,   

    with a default value 2.0 miles (3.0 kilometers). If the program time  

         

    limit is activated at the user preference setting, then the DISTANCE  

    

    goal will be deactivated. Use ▲/▼ keys or numeric keys (0-9) to adjust       

    the setting. Press the ENTER key to confirm your setting and proceed        

  to input your age. Or press QUICK START key to start this program  

    

    right away with default age and weight.

 

The CALORIE setting range is from 100 to 9999 kCal, with a default        

    value of 100 kCal. Use ▲/▼ keys or numeric keys (0-9) to make your      

    selection. Press the ENTER key to confirm your setting and proceed        

    to the age setting. Or press QUICK START key to start this program  

      

    right away with default age and weight.
3. The age setting range is from 10 to 90, with a default value of 35 years old. Use       

    ▲/▼ keys or numeric keys (0-9) to make your selection. Press the ENTER   

         

    key to confirm your setting and proceed to the weight setting. Or press QUICK       

   START key to start this program right away with default weight.
4. The weight setting range is from 50 to 450 lb. (20 to 205 kg), with a default  

       

    setting of 165 lb. (75 kg). Use ▲/▼keys or numeric keys (0-9) to make your  

        

    selection. Press the ENTER or QUICK START key to confirm your setting and      

    start exercising.
Follow prompts to begin your workout. Please refer to OPERATION Workout 

Programs for information about specific workout programs.

Note that a different workout program can be activated simply by pressing 

the other workout program key. The workout goal will remain the same, and 

progress toward the workout goal will continue to accrue.

Summary of Contents for T645L























































Reviews: