31
For bias which can not be fixed automatically, try the following methods to fix the belt (shown as the pictures):
* If the belt tends to move to the right, you should turn the belt adjustment screw on the right in clockwise
direction. We recommend you turning 1/4 turn each time and check how it works. If the belt remains slanting to
the right, turn the belt adjustment screw 1/4 on the left in counterclockwise direction (shown as the picture A).
* If the belt tends to move to the left, turn the belt adjustment screw on the left in clockwise direction for 1/4 turn.
If the belt remains slanting to the left, turn the belt adjustment screw on the right in counterclockwise direction
for 1/4 turn (shown as the picture B).
* After having been used for a period, the belt might be slightly elongated, and slippery and halt might occur when
a person is running on it. When these phenomena appear, you should secure the screws on both sides for 1/4
turn. If the belt is too tight, just loosen the screw on both sides for 1/4 turn (shown as the picture C).
3. After adjusting the running belt , press button twice to stop running , then press button for 5s to
switch on the no-load stop function and the TIME window will show "ON" , it means it has back to normal mode
and the running belt adjustment completed.
A
B
C
Wrench 6mm
Wrench 6mm
Wrench 6mm
Summary of Contents for P110M
Page 34: ...32 EXPLODED DRAWING...
