28
WARNING!
Before performing any maintenance to your treadmill, always unplug the power cord from the power
outlet.
CLEANING:
Routine cleaning of your treadmill will extend the its lifespan.
WARNING!
To prevent electrical shock, ensure to turn off the treadmill and unplug its power plug from the wall
electrical outlet before attempting any cleaning or maintenance.
AFTER EACH WORKOUT
: Wipe off the console and other treadmill surfaces with a clean, soft damp cloth to remove
excessive perspiration. DO NOT USE CHEMICALS.
WEEKLY CLEANING
: A treadmill mat is recommended to put on the walking belt for ease of cleaning. Because
dirt from your shoes contacts the belt and eventually ends up underneath the treadmill, vacuum underneath the
treadmill once a week.
DECK LUBRICATION
: The walking belt has been pre-lubricated at the factory. However, it is recommended to
check the walking board periodically for lubrication (lubricate every 10 days or 10 hours of operation) to ensure
optimal treadmill performance. Lift the sides of the walking belt and feel the top surface of the walking board as
far as you can reach underneath. If you feel signs of silicone, no further lubrication is required. If it feels dry to the
touch, lubrication is needed. Ask your retailer or contact our customer service team for the type of silicone.
1. LUBRICATION REMINDING
As shown in the figure, when the treadmill used over 40 hours, "LUB" will be displayed at the window, alternating
with the running time and accompanied by a beep sound , it is to remind the user to do lubrication for the
treadmill.
Please follow the lubricate guide in this manual to add lubricate oil for the treadmill , then remove the safety key
and press "speed +" and "speed -" at the same time as show in below figure.
When heard a long beep, release the pressed keys , then the Lubricate reminding order and the running time has
been cleared, and the treadmill can be used normally.
(if not to clear the running time, the time window will display "LUB" and time alternately , accompanied with beep
sound)
MAINTENANCE
KM/H
MP H
MP H
KM/H
Remov e
the safet y key , and pres s P+M buttons to
shif t betwee n Metric and Englis h Unit.
Summary of Contents for P110M
Page 34: ...32 EXPLODED DRAWING...