30
KM/H
MP H
MP H
KM/H
Remov e
the safet y key , and pres s P+M buttons to
shif t betwee n Metric and Englis h Unit.
3. Running Belt Tension Adjustment
The treadmill has been adjusted and passed QC inspection before delivery. If there is a phenomenon of bias
running belt, the possible reasons might be:
A.The frame is not stably laid.
B.The user is not running on the center of the running belt.
C.The user’s two feet use uneven strength when running.
1. Under stand by mode, Press Button for 5s in manual mode to close the no-load stop function and enter
into the running belt adjustment testing mode, the Time window will show "OFF", and the PULSE/CALORIE
window will show "CS".
2. Under test mode , Press button to start the treadmill , press or to adjust the speed to 3
MPH , then check the deviation of the running belt and adjust it according to below illustation. (For your safety,
anyboday do not stand on the running belt during the adjustment.)
Summary of Contents for P110M
Page 34: ...32 EXPLODED DRAWING...
