SportDOG SDR-AX, Operating Manual

Page: 9 / 16

8 1-800-732-0144 9 WWW.SPORTDOG.COM
SD-1825X / SD-1825XCAMO MODE CHART
(REFER TO PAGE 6 FOR HOW TO CHANGE MODES)
MODE:
TOGGLE
POSITION
DOGS
TOGGLE SWITCH
FUNCTION
UPPER BUTTON
FUNCTION
LOWER BUTTON
FUNCTION
SIDE BUTTON
FUNCTION
a b DIAL 1-7 V/T DIAL 1-7 V/T DIAL 1-7 V/T
4:
b
2
Dog 1 Dog 2
Rising High
Continuous Static
Stimulation
Vibe
High Continuous
Static Stimulation Vibe
Tone
5:a
*
2
Dog 1 Dog 2
Medium
Continuous Static
Stimulation
Tone
Low Continuous
Static Stimulation Tone
High
Continuous
Static
Stimulation
Tone
5:
b
2
Dog 1 Dog 2
Rising High
Continuous Static
Stimulation
Tone
High Continuous
Static Stimulation Tone
Vibe
6:
a
2
Dog 1 Dog 2
Medium
Continuous Static
Stimulation
Vibe
Low Continuous
Static Stimulation Vibe
High
Continuous
Static
Stimulation
Vibe
6:
b
2
Dog 1 Dog 2
High Continuous
Static Stimulation Vibe
Tone Vibe Remote Launcher
»
7:
a
2
Dog 1 Dog 2
High Continuous
Static Stimulation Tone
High Momentary
Static Stimulation Tone Locate Remote Beeper•
7:
b
2
Dog 1 Dog 2
High Continuous
Static Stimulation Tone
Vibe Tone Remote Launcher
»
V/T
(ID CODE)
N/A a N/A N/A See STEP 07
STEP::05 MATCH THE COLLAR RECEIVER AND
REMOTE TRANSMITTER
To match the Collar Receiver to work with a new Remote Transmitter or to reprogram a new Collar Receiver to work
with your existing Remote Transmitter:
1. Turn off the Collar Receiver.
2. Press and hold the On/Off Button. The Receiver Indicator Light will come on, then turn off after 4-5 seconds. If
the On/Off Button is released too early, the Receiver Indicator Light will begin flashing as normal. If this occurs,
start over from Step 1.
3. After the Receiver Indicator Light has turned off, release the On/Off Button.
4. Press and hold the Upper Button on the Remote Transmitter until the Receiver Indicator Light flashes 5 times.
Once the Receiver Indicator Light has flashed 5 times, the Collar Receiver has been matched and will begin
flashing as normal. If the Receiver Indicator Light does not flash 5 times, start over from Step 1.