SportDOG SDR-AX, Operating Manual

Page: 8 / 16

8 1-800-732-0144
KEY FOR SD-1825X / SD-1825XCAMO MODE CHART (PAGES 8 AND 9):
*
Factory Default Mode.
r For two-dog operation setup refer to STEP 06 on page 10.
^ For three- and six-dog operation setup refer to STEP 06 on pages 10-11.
• Locate Remote Beeper: The Side Button turns run mode off and locates the Remote Beeper. To enable run
mode again, press and hold the Side Button for 3 seconds.
» Remote Launcher: Match your SD-1825X or SD-1825XCAMO Transmitter to your Launcher Receiver by
pressing and holding the Launcher Receiver’s On/Off button. When a “P” appears on the Receiver’s LCD,
press the Upper Button on your Remote Transmitter. Your Remote Transmitter and Launcher Receiver are
now matched. The Side Button on your Remote Transmitter will be used to activate your Launcher basket.
SD-1825X / SD-1825XCAMO MODE CHART
(REFER TO PAGE 6 FOR HOW TO CHANGE MODES)
MODE:
TOGGLE
POSITION
DOGS
TOGGLE SWITCH
FUNCTION
UPPER BUTTON
FUNCTION
LOWER BUTTON
FUNCTION
SIDE BUTTON
FUNCTION
a b DIAL 1-7 V/T DIAL 1-7 V/T DIAL 1-7 V/T
1:
a
2r
Dog 1 Dog 2
High Continuous
Static Stimulation Vibe
High Momentary
Static Stimulation Vibe
Tone
1:
b
2
Dog 1 Dog 2
High Continuous
Static Stimulation Vibe
High Continuous
Static Stimulation Vibe Locate Remote Beeper
•
2:
a
2
Dog 1 Dog 2
High Continuous
Static Stimulation Tone
High Momentary
Static Stimulation Tone
Vibe
2:
b
2
Dog 1 Dog 2
High Continuous
Static Stimulation Vibe
Low Continuous
Static Stimulation Vibe
Tone
3:
a
6^
Dogs
1-3
Dogs
4-6
Dog 1 (a) / Dog 4 (b) Dog 2 (a) / Dog 5 (b) Dog 3 (a) / Dog 6 (b)
High Continuous
Static Stimulation Tone
High Continuous
Static Stimulation Tone
High
Continuous
Static
Stimulation
Tone
3:
b
2
Dog 1 Dog 2
High Continuous
Static Stimulation Tone
Low Continuous
Static Stimulation Tone
Vibe
4:
a
6
Dogs
1-3
Dogs
4-6
Dog 1 (a) / Dog 4 (b) Dog 2 (a) / Dog 5 (b) Dog 3 (a) / Dog 6 (b)
High Continuous
Static Stimulation Vibe
High Continuous
Static Stimulation Vibe
High
Continuous
Static
Stimulation
Vibe