SportDOG SDR-AX Operating Manual Download

Page: 6 / 16

6 1-800-732-0144

CHANGING STATIC STIMULATION RANGES

Your SportDOG® Brand Collar Receiver comes with 2-3 static stimulation ranges depending on the model. In the

Remote Transmitter’s default mode (see below) there are 21 static stimulation levels within each range, with 1

being the lowest and 21 being the highest. The default range setting is 2 or medium.
To change the range of static stimulation, follow these steps:
1.  Make sure the Collar Receiver is off.
2.  Then turn the unit on by pressing and releasing the On/Off button.
3.  After the Indicator Light turns off and within 5 seconds, press and hold the On/Off button for 3 seconds.
4.  The Collar Receiver will then beep and the Indicator Light will flash orange as indicated by the chart below. Continue

to hold the button until the number of beeps/orange flashes equals the desired stimulation range shown.

5. Release the button once the desired range is selected; the Collar Receiver will turn off.
6. Turn the unit back on. It will then beep according to the static stimulation range selected in Step 4.

BEEPS

STATIC STIMULATION RANGE DOG TEMPERAMENT

MODEL

1 beep

Low

Mild

SD-425X, SD-825X, SD-1225X,

SD-1825X, and SD-1825XCAMO

2 beeps

Medium

Moderate

SD-425X, SD-425XS,

SD-425XCAMO, SD-825X,

SD-1225X, SD-1825X,

and SD-1825XCAMO

3 beeps

High

Stubborn

SD-425XS, SD-425XCAMO,

SD-1225X, SD-1825X,

and SD-1825XCAMO

STEP::04 PROGRAM THE REMOTE TRANSMITTER

Your Remote Transmitter has multiple operational modes (seven modes: SD-425X,

SD-425XS, SD-425XCAMO, SD-825X, SD-1225X or fourteen modes: SD-1825X,

SD-1825XCAMO) to allow you to select the best match for your type or style of training.

The Remote Transmitter is factory set to mode

5 (SD-425X, SD-425XS, SD-425XCAMO,

SD-825X, SD-1225X) or

5:a (SD-1825X, SD-1825XCAMO). There is also one

programming mode (Mode V/T) which allows you to change the system’s ID code.

TO CHANGE THE MODE

1. Referring to the model appropriate mode chart on pages 7-9, choose your

desired mode number (

1-7) and toggle position (a or b if using SD-1825X,

SD-1825XCAMO). Adjust both the Intensity Dial and Toggle Switch to match your

desired mode.

2. Turn the Remote Transmitter over and remove the belt clip (if attached).
3. Using a pen or the tine on the buckle of your collar strap, press and release the

Mode Button. When the Mode Button is pressed, the Transmitter Indicator Light

will be solid in color. When it is released, it will flash a number of times that

corresponds to the mode selected.

TOGGLE SWITCH* IN

THE

POSITION

TOGGLE SWITCH IN

THE

POSITION

*Toggle switch only applicable to

SD-1825X and SD-1825XCAMO