SportDOG SDR-AX, Operating Manual

Page: 7 / 16

6 1-800-732-0144 7 WWW.SPORTDOG.COM
For example, if mode 6:a is desired on the SD-1825X, switch the toggle to the grey/a position and adjust the
Intensity Dial to Level 6. Once the Mode Button has been depressed, the Transmitter Indicator Light will be solid,
and once the Mode Button is released, the Transmitter Indicator Light will flash 6 times. However, if you select
Mode V/T (ID Code) in the grey/a position, the light will remain solid in color once the Mode Button is released.
NOTE: If you own an original SD-425, SD-425S, SD-425CAMO, SD-825, SD-1225, SD-1825, or SD-1825CAMO your
transmitter will work with the X-Series Add-A-Dog® collars, but you will need to download the correct mode chart
for your system from sportdog.com.
SD-425X / SD-425XS / SD-425XCAMO / SD-825X / SD-1225X
MODE CHART
(REFER TO PAGE 6 FOR HOW TO CHANGE MODES)
MODE
UPPER BUTTON
FUNCTION
LOWER BUTTON
FUNCTION
SIDE BUTTON
FUNCTION
NUMBER
OF DOGS
1 Continuous static stimulation
(Level set by Intensity Dial)
OR Vibe if dial set to V/T
Momentary static stimulation
(Level set by Intensity Dial)
OR Vibe if dial set to V/T
Tone only 1
2 Continuous static stimulation
(Level set by Intensity Dial)
OR Tone if dial set to V/T
Momentary static stimulation
(Level set by Intensity Dial)
OR Tone if dial set to V/T
Vibe only 1
3 Dog 1: Continuous static
stimulation (Level set by
Intensity Dial)
OR Tone if dial set to V/T
Dog 2: Continuous static
stimulation (Level set by
Intensity Dial)
OR Tone if dial set to V/T
Dog 3: Continuous static
stimulation (Level set by
Intensity Dial)
OR Tone if dial set to V/T
3
4 Dog 1: Continuous static
stimulation (Level set by
Intensity Dial)
OR Vibe if dial set to V/T
Dog 2: Continuous static
stimulation (Level set by
Intensity Dial)
OR Vibe if dial set to V/T
Dog 3: Continuous static
stimulation (Level set by
Intensity Dial)
OR Vibe if dial set to V/T
3
5* Medium Continuous static
stimulation (Level set by
Intensity Dial)
OR Tone if dial set to V/T
Low Continuous static
stimulation (Level set by
Intensity Dial)
OR Tone if dial set to V/T
High Continuous static
stimulation (Level set by
Intensity Dial)
OR Tone if dial set to V/T
1
6 Medium Continuous static
stimulation (Level set by
Intensity Dial)
OR Vibe if dial set to V/T
Low Continuous static
stimulation (Level set by
Intensity Dial)
OR Vibe if dial set to V/T
High Continuous static
stimulation (Level set by
Intensity Dial)
OR Vibe if dial set to V/T
1
7 Continuous static stimulation
(Level set by Intensity Dial)
OR Tone if dial set to V/T
Momentary static stimulation
(Level set by Intensity Dial)
OR Tone if dial set to V/T
Locate Remote Beeper** 1
V/T
(ID CODE)
N/A N/A See STEP 07 N/A
NOTE: Modes 1, 2, 3, 4, and 7 provide 7 levels of stimulation, which correspond to the setting of the Intensity Dial.
Modes 5 and 6 provide more “increments” to choose from – a total of 21 levels of static stimulation. For
example, in mode 5 with the Intensity Dial set at 1, the Lower Button provides level 1 of 21, the Upper Button
provides level 2 of 21, and the Side Button provides level 3 of 21.
* Factory Default Mode.
** Locate Remote Beeper: The Side Button turns run mode off and locates the Remote Beeper. To enable run mode again,
press and hold the Side Button for 3 seconds.