background image

7

2. SAFETY PRECAUTIONS (CONT.)

●  This product must be grounded. If it should malfunction or breakdown, 

Improper grounding can increase the risk of electric shock. The product 

is equipped with a power cord having an equipment-grounding conductor 

and a grounding plug. The plug must be inserted into an appropriate 

outlet that is properly installed and grounded in accordance with all local 

codes and ordinances. Check with a qualified electrician if you are in 

doubt as to whether the power outlet is properly grounded.

● Noise emission under load is higher than without load.
●  This equipment has been tested and found to comply with the limits for 

a Class B digital device, pursuant to part 15 of the FCC Rules. These 

limits are designed to provide reasonable protection against harmful 

interference in a residential installation. This equipment generates, uses 

and can radiate radio frequency energy and, if not installed and used 

in accordance with the instructions, may cause harmful interference to 

radio communications. However, there is no guarantee that interference 

will not occur in a particular installation. If the user desires to correct the 

interference, it is at the user’s own expense.

●  In conformity with the European Union Machinery directive 2006/42/

EC, this equipment runs at sound pressure levels below 70 dB(A) at the 

average operating speed of 12 km/hr.

●  The recommended minimum operating temperature is 15 degree 

Celsius.

●  The user weight limit for this product is 205 kg, 450 lb.
●  At maximum speed, this product meets standards for users up to 100 kg, 

220 lb.

If the product is used in a nominal 120V circuit and the rated current is less 

than 15A with a grounding plug, use a plug like the one shown below:

 

GROUNDED 

OUTLED 

GROUNDING 

PIN 

Summary of Contents for 4799.304



























































Reviews: