22
STEP 7
Align the Walk Belt
(a) First, make sure the treadmill is on a level surface and the incline is at 0% .
(b) Start the speed at a lower rate of 3kph/2.5mph to check if the walk belt is
aligned and if there is an equal amount of space between walk belt and
side-rails on both sides. Remove the rear cover and turn the rear roller
adjustment screw to adjust the walk belt if there is misalignment.
(c) Put the speed up greater than, or equal to 15kph to ensure the belt is
aligned.
(d) Check if the walk belt falls in the middle of 2 green labels in the front of the
deck. Just slightly off center is acceptable.
(e) Let the treadmill run for 2 min., and check if the walk belt is shifted off-
center, if so, go back to step (d) for readjustments.
(f) Finish adjustment and walk belt is aligned.
* Make adjustments as needed, but avoid turning rear roller screws more
than one quarter rotation at a time.
Summary of Contents for 4799.304
Page 58: ...58 Your Authorized Distributor...
