16
STEP 3
Display Panel Installation
Follow steps (a) through (j) to install the display panel.
(a) Remove the left and right covers from the handlebar assembly (A2), and
the loosen the screw (45) to remove the front cover.
(b) Attach the handlebar assembly (A2) to the left and right pedestals (A3)
(A4), then mount screws (42) (44) in position. After all screws on the left
and right pedestals (A3)(A4) were mounted in position, fully tighten all
mounting screws to secure the assembly. (Note: Make sure the data ca-
ble is not pinched.)
(c) Install the connectors in the handlebar assembly (A2) on the data cables
in the left and right pedestals (A3)(A4) as shown.
(a)
A2
(b)
(c)
45
A2
A3
A4
44
44
42
42
44
42
Summary of Contents for 4799.304
Page 58: ...58 Your Authorized Distributor...
