Data di emissione:
Novembre, 2015
Revisione:
1
Pag. :
9/24
- In order to activate the mixing auger it is
necessary to start up the switch A (fig.6).
- In order to activate the warming elementi it is
necessary to start up the switch B, considering
that if the mixing auger is not working (switch A
not in I position) the warming element does not
work (fig.6).
NOTE: when the heating component the red
light C is on (fig.6); the machine warms up and
keeps the product at the right temperature,
trough ON/OFF cycles, therefore during the
normal functioning the light C will turn ON and
OFF to show when the warming element is
ON/OFF.
NOTE: the machine is provided by an internal
thermostat to set the product’s temperature,
you can calibrate this thermostat to a maximum
80°C.
- Once that the product reaches the set
temperature, to deliver, put the glass under the
tap and pull the leve ras shown in figure 7.
Fig. 6
Fig. 7
A
B
C
Summary of Contents for NINA HOT Series
Page 1: ...Data di emissione Novembre 2015 Revisione 1 Pag 1 24 NINA HOT Operator s manual Page 2 ...
Page 20: ...Data di emissione Novembre 2015 Revisione 1 Pag 20 24 13 WIRING DIAGRAM ...
Page 21: ...Data di emissione Novembre 2015 Revisione 1 Pag 21 24 ...
Page 22: ...Data di emissione Novembre 2015 Revisione 1 Pag 22 24 ...