CUSTOMER SERVICE 1-888-707-1880
Dyaco Canada Inc.©2013
9
STEP 3:
Connecting Arm
1.
Slide the Rubber Sleeve
(162)
onto the left
(16)
and right
(17)
Upper Swing Arms. Make sure
the wide part is at the bottom.
2.
Attach the wire
(50)
from the Right Upper Swing Arm
(17)
to the wire
(49)
that exits the
Console Mast tube
(12)
. Slide the Switch Wire Cap
(161)
onto the wire with the wide side
facing the Swing Arm.
3.
Insert the Upper Swing Arm
(17)
into the Lower Swing Arm. Fasten together with three Hex
Head Bolts
(159)
, two Curved Washers
(160)
, and three Nyloc Nuts
(127)
.
4.
Repeat step 3.3 from above on the left side.
HARDWARE
#160.
5/16" × 23 × 1.5T
Curved Washer (4 pcs)
#159.
5/16" × 1-3/4"
Hex Head Bolt (6 pcs)
#127.
5/16" × 7T
Nyloc Nut (6 pcs)
#161
.
Switch Wire
Cap
(1 pc)
