background image

CUSTOMER SERVICE 1-888-707-1880 

                                                                          Dyaco Canada Inc.©2013                                            

 

SAFETY PRECAUTIONS 

 

IMPORTANT SAFETY INFORMATION 

THIS UNIT IS INTENDED FOR HOUSEHOLD USE ONLY 

READ ALL INSTRUCTIONS BEFORE USING THIS ELLIPTICAL 

 

CAUTION: 

Before starting any exercise program, it is recommended that you consult 

your physician. 

WARNING: 

Connect this unit to a properly grounded outlet only. 

DANGER: 

To reduce the risk of electric shock, always unplug the elliptical from the 

electrical outlet immediately after using and before cleaning. 
 
Thank you for purchasing our product.    Even though we go to great efforts to ensure the 
quality of each product we produce, occasional errors and/or omissions do occur.    In any 
event should you find this product to have either a defective or a missing part please contact 
us for a replacement. 
 
This product has been designed for home use only.    Product liability and guarantee conditions   
will not be applicable to products being subjected to professional use or products being used in   
a gym centre. 
 
This exercise equipment was designed and built for optimum safety.    However, certain 
precautions apply whenever you operate a piece of exercise equipment.    Be sure to read 
the entire manual before assembly and operation of this machine.    Also, please note the 
following safety precautions: 
 
1. 

Read the OWNER’S OPERATING MANUAL and all accompanying literature and 
follow it carefully before using your elliptical. 

2. 

It is the responsibility of the owner to ensure that all users of the elliptical exerciser 
are adequately informed of all precautions. 

3. 

If dizziness, nausea, chest pains, or any other abnormal symptoms are experienced 
while using this equipment, STOP the workout at once.    CONSULT A PHYSICIAN 
IMMEDIATELY. 

4. 

The elliptical exerciser is intented for in-home use only.    Do not use the elliptical 
exerciser in a commercial, rental, or institutional setting. 

5. 

Inspect your exercise equipment prior to exercising to ensure that all nuts and bolts 
are fully tightened before each use. 

6.   

The elliptical must be regularly checked for signs of wear and damage. Any part 
found defective, the part must be replaced with new spare part from the 
manufacturer. 

7.      Fitness equipment must always be installed on a flat surface, do not place the unit 

on a loose rug or uneven surface. It is recommended to use an equipment mat to 
prevent the unit from moving while it is being used, which could possibly scratch or 
damage the surface of your floor.    Keep the elliptical exerciser indoors, away from 
moisture and dust. 

8. 

No changes must be made which might compromise the safety of the equipment. 

9. 

It is recommended to have a minimum of 1’ safe clearance around the exercise 
equipment while in use. 

10. 

Keep children and pets away from this equipment at all times while exercising. 

Summary of Contents for 161173295








































Reviews: