6-00
DGP01448AAA
GSS7725 Interference Generator User Manual
© Spirent Communications plc 2002-2017
6-3
Command
Description
Default off
:FILe:FS <value>
Set sampling frequency of IQ file.
Where <value> is an integer in Hz and must be one of:
4000000
4 MS/s
16000000
16 MS/s
26000000
26 MS/s
51500000
51.5 MS/s
120000000
120 MS/s
Default 16000000
:FILe:FS:TARget <value>
Set the output (target) frequency of the RF. The IQ file will be
converted to this frequency.
Where <value> is an integer in Hz and must be one of:
4000000
4 MS/s (for calibration only)
25000000
25 MS/s
:FILe:ENDianess <value>
Sets the endianness of the input file.
Where <value> is one of:
0
Big
1
Little
Default 0
:FILe:FILEpath “<path-str>”
Sets the IQ file path.
Where “<path-str>” is a string enclosed in quotes
No default
*RST
Reset all settings to defaults
:OUTput:STArt
Start the RF output
:OUTput:STOp
Stop the RF output
Note that when you disconnect from the GSS7725 controller the RF
output will stop automatically.
:STATus
Returns the current status of the GSS7725 Controller. The following
states can be returned:
CONNECTED
Remote connection waiting for command
CONFIG
Setting internal status
RUNNING
Generating RF
ERROR
Blocking status due to error
PROCESSING
The software is busy processing a remote
command
