DGP01448AAA
6-00
5-2
GSS7725 Interference Generator User Manual
© Spirent Communications plc 2002-2017
5.2 Use File
Notes
:
1)
The
Interference
dialog is only available after selecting
Interference
in
Antenna Signal Types
,
see
Figure 5
.
2)
If an *.itf file is present and selected within the scenario,
SimGEN
defaults to using this
interference file.
Interference files use the extension *.itf. In the Scenario contents window, under each antenna,
highlight Interference file: see Figure 6, which shows the default filename default_v1-0.itf.
Figure 6 Scenario tree
Either click Select to select an existing file from the Select File dialog (shown in Figure 7) or create
a new file by clicking New.
Then set SimGEN to use the interference file you specify by selecting the checkbox in the scenario
tree.
