6-00
DGP01448AAA
GSS7725 Interference Generator User Manual
© Spirent Communications plc 2002-2017
5-5
5.4 Interference commands
Note: For all commands that include Level and Custom Waveform
parameters, select Check so
that SimGEN determines if:
(
Level
+
Reference Level
)
is less than -130.0 dBm
(
Level
+
Reference Level
)
exceeds -20.0 dBm
You can apply interference commands using an Interference Simulation File (*.itf) (double-click
Vehicle - Antenna_n - Options - Interference file) or dynamically through an Interactive Interference
dialog.
In most dialogs, you must enter the Action time in days and hh:mm:ss.
All GSS7725 commands persist until countermanded by another command in the same category.
Click on File - Save as to save the Interference Simulation File. Type a name for the file. The file
name you use appears in the Scenario tree next to Options - Interference file. By default, this file is
stored in the scenario folder.
Comment
Comments have no impact on functionality of the Interference channel.
Use this command Figure 10, to insert comments you type in the Comments area into the
interference simulation file.
Figure 10 Command type - Comment
Interference Custom Waveform 7725
Use this command see Figure 11, to setup the GSS7725 to output the IQ data as RF at the given
sample rate, frequency and power.
