6-00
DGP01448AAA
GSS7725 Interference Generator User Manual
© Spirent Communications plc 2002-2017
5-3
Figure 7 Select File dialog
Interference Simulation File editor
Note
: Each Interference command is Interferer channel specific, so when associating an existing
*.itf file with an antenna, it is important to ensure that the Interferer channel is available on that
antenna.
The Interference Simulation File editor lets you view or edit the interference characteristics for all
Interference channels associated with a given antenna. After selecting an existing file or opening a
new file, you can then open the Interference Simulation File editor, seeFigure 8, by double-clicking
on Vehicle - Antenna_n - Options - Interference file in the Scenario Contents window.
Figure 8 Interference Simulation File editor
You must specify the Interference commands for each Interference channel as a time ordered list.
0 00:00:00 indicates that the action specified will take place at the start time of the scenario, 0
00:00:10 will take place 10 seconds into the scenario, and so on.
