IM-P198-02
MI Issue 5
53
5.24 Faults
This menu (Figure 55) lets the user view and / or clear the flowmeter faults. Each fault has a
code number and a message that describes the details of the fault. A list of faults is stored
in the memory. Some faults are 'latched' which means they must be cleared from the list by
the user. The fault indicator on the front panel will turn on if any faults are detected, and will
not turn off until all faults have been corrected and cleared from the list.
If a fault condition is occurring continuously, the fault will not clear until the cause of the
fault is corrected.
For a complete list of fault error codes see pages 82 and 83.
Main Menu
Return to Display
Reset Totalisers
Reset Min / Max
Display Set-up
Set-up Wizard
Network Set-up
Set Time / Date
Faults
Service
2 faults
4-20 Analog output 1
Error Code : 5
Back to Main
Right arrow
2 faults
4-20 Analog output 1
Error Code : 5
Clear fault
Enter
1 fault
4-20 Analog output te
Error Code : 8
Next fault
1 faults
4-20 Analog output te
Error Code : 8
Clear fault
0 Faults
No Faults
Back to Main
Left arrow
Enter
Enter / right
arrow
Total number
of faults
The fault
message is
scrolled across
the screen
Press the enter
key when the
Edit field is
selected to
clear this fault.
The next
fault is now
displayed.
Fig. 55