IM-P198-02
MI Issue 5
36
5.6 Reset totalizers
This menu (Figure 37) lets the user view and/or clear the resetable totalizers. There are
4 totalizer values shown in this menu. Of the 4, only the resetable totalizers can be reset
to zero. The non-resetable totalizers can be viewed in this menu, but not reset to zero.
5.5 Program mode menus
The Main menu is the first menu in Programming Mode - see
Figure 36. To access one of the sub-menus, select the menu
using the up or down arrow keys and then press the enter key
or right arrow key. The sub-menus are described below in the
sequence in which they appear in the Main Menu. The user can
return to Run mode by selecting the 'Return to Display' option.
The following pages show how to navigate the sub-
menus. Duplicate paths through the menus are not
shown and the scrolling list screens are not shown
with the scroll bar or navigation fields.
Fig. 36
Main Menu
Return to Display
Reset Totalisers
Reset Min / Max
Display Set-up
Set-up Wizard
Network Set-up
Set Time / Date
Faults
Service
Main Menu
Return to Display
Reset Totalisers
Reset Min / Max
Display Set-up
Set-up Wizard
Network Set-up
Set Time / Date
Faults
Service
Select Totaliser
Totaliser #1
#1 Non-resettable
Totaliser #2
#1 Non-resettable
Totaliser #1
345882
Since December 19 2011
Reset
Enter / right
arrow
Enter / right
arrow
Use the right arrow key
to select the middle
field. The word 'Reset'
appears to indicate this
totaliser can be reset.
Fig. 37